TMR mixer sizing calculator
Required struck capacity in cubic feet and cubic meters for your largest feeding group, with auger class, horsepower and matching model tiers.
TMR Mixer Sizing Specification Sheet · rmhmixers.com/tools/mixer-sizing-calculator/ ·
How this is calculated
The calculator sizes the mixer for one batch: the largest group you feed in one load.
- Batch weight
= head × as-fed intake ÷ feedings per day - Net feed volume
= batch weight ÷ ration density - Required struck capacity
= net volume ÷ safe fill factor × (1 + buffer) - Metric
m³ = cu. ft. ÷ 35.3147·kg = lbs ÷ 2.20462·kg/m³ = lbs/cu. ft. × 16.0185
Why density matters most
A silage-heavy ration at 23 lbs/cu. ft. needs roughly a third less tub than a straw-heavy dry-cow ration at 13.5 lbs/cu. ft. for the same weight. If you are unsure, do the bucket test on a real batch: a level 5-gallon bucket holds about 0.67 cu. ft., so net pounds × 1.5 gives lbs/cu. ft.
Auger class and horsepower bands
| Required capacity | Auger class | Power | Typical price |
|---|---|---|---|
| ≤ 550 cu. ft. (≤ 15.6 m³) | Single-auger vertical | 80–120 PTO HP · compact SP 140–175 HP | $50k–$75k new · $20k–$55k used |
| 551–950 cu. ft. (15.6–26.9 m³) | Twin-auger vertical | 125–180 PTO HP · SP 180–230 HP | $85k–$130k new · $45k–$88k used |
| > 950 cu. ft. (> 26.9 m³) | Large twin or triple-auger | 185–260+ PTO HP · SP / truck 220–300+ HP | $125k–$165k+ new · SP/truck $240k–$360k+ |
Above 1,350 cu. ft. per batch the calculator splits the feeding into equal loads, because few mobile mixers run well beyond that size. Rule of thumb for one feeding a day: about 5 cu. ft. per cow on silage-heavy rations, 6–7 cu. ft. on bulky hay or straw rations.
Estimates for planning and dealer conversations, not a guarantee of any machine's performance. See terms of use.