Pricing guide
2026 TMR mixer pricing & used equipment inspection guide
New, late-model and high-hour price bands across all four mixer classes, plus the seven checks to make before you buy a used mixer.
2025–2026 US market ranges
Machine price bands
| Mixer class | Typical capacity | Older / high-hour used | Late-model used (2020–2024) | New (2025–2026) |
|---|---|---|---|---|
| Single-auger pull-type vertical | 300–550 cu. ft. (8.5–15.5 m³) | $20,000–$38,000 | $42,000–$62,000 | $50,000–$75,000 |
| Twin / triple-auger pull-type vertical | 600–1,200+ cu. ft. (17–34+ m³) | $35,000–$58,000 | $60,000–$95,000 | $85,000–$150,000+ |
| Truck-mounted vertical | 600–1,400 cu. ft. (17–40 m³) | $75,000–$110,000 | $110,000–$170,000+ | $200,000–$300,000+ |
| Self-propelled TMR mixer | 425–1,270 cu. ft. (12–36 m³) | $30,000–$90,000 | $100,000–$180,000+ | $200,000–$350,000+ |
What moves a new price
Tub size and auger count first, then conveyor type, liner steel, knife package, axle and tire package, and the scale indicator.
Late-model used
2020–2024 machines, often trade-ins at dealers, typically 30–45% under new. Best value for farms that can inspect carefully.
High-hour used
The price looks good until the liner, augers and planetary are priced in. Add the rebuild costs from the parts guide to the asking price.
Used mixer inspection
Seven checks before you buy
- Auger flighting wearMeasure flighting width against new at the bottom flight; rounded edges and thin outer edges mean re-flighting ($200–$600 a section plus welding) or a new auger ($2,000–$6,000+).
- Lower tub wall thicknessTap or ultrasound the bottom 12–18 inches. Pinholes or patches mean a liner kit ($1,000–$7,000+).
- Planetary oilDrain a sample: metal flakes or milky oil point to bearings or seals. A rebuild runs $1,000–$3,000; replacement $3,500–$10,000+.
- Knives and kick platesCount knives, check bolt holes for elongation, and ask what knife system it takes.
- Milling head (self-propelled)Drum bearings, knives, drive chain or belts and the elevator; ask for the engine and drum hours separately.
- Load cells and indicatorWeigh a known load (a full fuel tank or a weighed bale) and check that it returns to zero. Cells and bars run $800–$4,500.
- Chassis, tires and freightAxle, hitch, brakes and tires — then get a freight quote. Moving an oversize mixer 1,000 miles can cost $2,000–$5,000.

Wear items
Full parts guideRebuild costs to add to a used price
| Component | Replacement cycle | Typical US cost |
|---|---|---|
| Standard knives | 6–12 months | $15–$40 per blade · $300–$1,000+ per set of 8–24+ |
| Modular tungsten-carbide knives | 12–24+ months | $40–$80+ per blade assembly |
| Auger re-flighting strips (AR steel) | 3–6 years | $200–$600 per section, plus welding labor |
| Complete replacement vertical auger | 5–10 years | $2,000–$6,000+ each · $4,000–$18,000 twin/triple |
| Partial / bottom mild-steel tub liner | 5–8 years | $1,000–$2,500 |
| Full stainless / AR-steel tub liner kit | 8–15+ years | $3,000–$7,000+ |
| Planetary gearbox rebuild | As needed | $1,000–$3,000 |
| Planetary gearbox replacement | Major failure | $3,500–$10,000+ |
| Scale load cells / weigh bars / indicators | 3–7 years or failure | $800–$4,500 |
Found a used machine and want a second opinion on price, or want us to find one? Send a used-mixer request.