TMR feed mixers: which type fits your operation
Pull-type vertical, self-propelled, truck-mount, stationary and horizontal reel mixers compared on capacity, power, labor and price — then sized to your herd.
Five mixer types compared
| Type | Capacity | Power source | Best fit | New price band |
|---|---|---|---|---|
| Pull-type vertical (1–3 augers) | 300–1,200+ cu. ft. | Tractor PTO, 80–260+ HP | Most dairies and feedlots up to ~1,000 head; any spare tractor can run it | $50,000–$150,000+ |
| Self-propelled | 12–36 m³ (425–1,270 cu. ft.) | Own diesel engine, 140–300 HP | 500+ cows, labor-short yards, multi-site barns on roads | $200,000–$350,000+ |
| Truck-mount vertical | 600–1,400 cu. ft. | Truck chassis, hydrostatic or mechanical drive | Long hauls between barns, large feedlots, custom feeding | $200,000–$300,000+ |
| Stationary vertical | 300–1,400+ cu. ft. | Electric motor | Fixed feed centers feeding conveyors or delivery wagons; ~$0.25–$0.30/ton energy cost | Varies with motor and installation |
| Horizontal reel | 300–1,000+ cu. ft. | Tractor PTO or truck | Silage-heavy rations with little long hay; fast, uniform mixing | Comparable to vertical of same size |
What you are actually buying
Every vertical mixer is the same handful of wear systems. When you compare quotes, compare these — not paint.
- Tub and linerMild steel, AR200–AR400 or stainless lower tub. The bottom 12–18 inches wear first.
- Augers and flightingSingle, twin or triple; flighting edge and knife count set processing speed for long hay.
- KnivesStandard or tungsten-carbide modular; dull knives are the first cause of a poor PSPS score.
- Planetary drive and gearboxComer, Bondioli & Pavesi and similar; 2-speed gearboxes cut start-up load on bigger tractors.
- DischargeDrop chute, side door, or hydraulic fold-up / slide-shift conveyor for high bunks.
- ScaleLoad cells or weigh bars plus a cab indicator (Digi-Star, Weigh-Tronix and others). Accuracy here drives ration cost.

When a tractor is not the answer
Truck-mount vertical mixers
A 600–1,400 cu. ft. tub on a straight-truck chassis drives at road speed between barns and pens. Hydrostatic platforms mix while driving; mechanical drives run from a PTO. New units run $200,000–$300,000+, late-model used $110,000–$170,000+. They make sense when feed routes are long, roads link the sites, or a custom feeder serves several farms.
Truck-mount in the pull-type guideStationary mixers
Electric vertical mixers at a fixed feed center, filled by loader or conveyors and emptied into a delivery wagon or belt. Energy cost runs around $0.25–$0.30 per ton mixed, well under a diesel wagon. The trade-off is infrastructure: a pad, power supply and a second machine to deliver.
Ask for stationary optionsGuides for the two main choices

Self-propelled mixers
Milling drum vs. bucket, 4WD/4WS, single-operator economics, service risk.
Read the guide
Pull-type vertical & truck-mount
Single vs. twin vs. triple, PTO horsepower, gearboxes and discharge.
Read the guide
2026 pricing & used inspection
Price bands for all four classes and a 7-point used-mixer check.
See prices