Independent TMR mixer sizing & multi-brand sourcing · US & Canadaquotes@rmhmixers.comparts@rmhmixers.com
Technical reference

RMH TMR mixer specifications & capacity cross-reference

Liberty, VSL, Vulcan, Premium, TurboMix and Triple 36 in cubic meters and cubic feet, lined up against North American vertical mixer classes.

Independent reference. RMH Mixers (rmhmixers.com) is an independent livestock feeding equipment specification, sizing, and multi-brand sourcing platform. We are not affiliated with, endorsed by, or an official factory representative of R.M.H. Lachish Industries Ltd. or any equipment manufacturer referenced on this site. All OEM brand names and model designations are used strictly for technical comparison, capacity cross-reference, and aftermarket parts identification.

Model line-up

Capacities are published tub ranges; conversions at 1 m³ = 35.3147 cu. ft. Check the machine's plate or manual for an exact model.
SeriesCapacity (m³)Capacity (cu. ft.)Build notesNorth American equivalent class
Liberty12–14 m³425–495 cu. ft.Compact self-propelled vertical for small-to-mid dairies450–500 cu. ft. single-auger pull-type
VSL14–18 m³495–635 cu. ft.Compact self-propelled, front spiral chopper, 3CR12 stainless housing500–600 cu. ft. single / small twin
Vulcan14–20 m³495–705 cu. ft.Multi-wheel steering, ~220 HP Volvo engine options600–700 cu. ft. twin-auger
Premium15–24 m³530–850 cu. ft.Twin vertical augers, Eco/Energy-saver modes, 4WD/4WS options700–900 cu. ft. twin-auger
TurboMix20–30 m³705–1,060 cu. ft.Heavy twin-auger, ~208–218 HP Deutz/Volvo Penta, 4WD/4WS, up to 40 km/h, dual-side discharge900–1,100 cu. ft. twin / triple
Triple 3636 m³~1,270 cu. ft.Multi-axle high-capacity unit for mega-dairies1,200–1,400 cu. ft. triple-auger / truck-mount

Series notes

Liberty (12–14 m³)

The compact entry machine for small-to-mid dairies that want one-operator feeding without a full-size self-propelled. At one feeding a day on a mixed ration it covers roughly 150–200 cows per load.

VSL (14–18 m³)

Compact self-propelled with a front spiral chopper and 3CR12 stainless steel housing — a corrosion-resistant steel that matters where acidic silage sits on tub walls.

Vulcan (14–20 m³)

Built around maneuverability: multi-wheel steering for tight freestall alleys, with Volvo engine options around 220 HP.

Premium (15–24 m³)

Twin vertical augers with Eco/Energy-saver modes and 4WD/4WS options; the mid-size workhorse for 300–600-cow groups.

TurboMix (20–30 m³)

Heavy-duty twin-auger with Deutz or Volvo Penta engines around 208–218 HP, 4WD/4WS, road speeds up to 40 km/h and dual-side discharge — aimed at large dairies with barns spread over a site.

Triple 36 (36 m³) and trailed / stationary lines

A multi-axle 36 m³ (~1,270 cu. ft.) unit for mega-dairies, plus vertical trailed and stationary feed mixers in the wider range.

Reading a model number

On most self-propelled lines the number after the series name is the tub size in cubic meters (a "TurboMix 24" is a 24 m³ tub, about 850 cu. ft.). When ordering wear parts, the serial plate, year and auger count matter more than the series name: knife bolt patterns and liner sections change between production years.

Which size for your herd?

Use the sizing calculator with the self-propelled 75% fill factor; it marks which RMH tier fits your batch. For a North American pull-type or self-propelled alternative at the same capacity, see the brand comparison.

North American dealer and parts coverage

RMH sells in North America through a small regional dealer network, concentrated in Pennsylvania with parts warehousing expanding in Wisconsin. Owners outside those regions often source wear parts — knives, flighting, liners, scale components — from multi-brand aftermarket suppliers. Send your make, model and serial and we route the request.