Pull-type vertical & truck-mount TMR mixers
300–1,400+ cu. ft.: single, twin and triple augers, tractor horsepower matching, gearboxes, discharge options and what each class costs.

Single vs. twin vs. triple augers
| Augers | Capacity | Tractor PTO | Notes |
|---|---|---|---|
| Single | 300–600 cu. ft. | 80–120 HP | Lowest cost and power; fine for up to roughly 100–150 cows per batch on silage rations. |
| Twin | 550–950 cu. ft. | 125–180 HP | Most common dairy size; faster processing of long hay, more even discharge. |
| Triple | 900–1,400+ cu. ft. | 185–260+ HP | Large dairies and feedlots; long tub needs a matching tractor and turning room. |
More augers do not mean better mixing by themselves. What matters is the right fill (60–80% of struck capacity), sharp knives and the loading order. The sizing calculator gives you the capacity; this page helps pick the build.
Matching the tractor
Undersized tractors are the most common mistake. A full twin-auger mixer starting from rest draws far more than it does once rolling. Two rules from the field:
- Use the PTO horsepower band of the mixer class, not the engine rating of the tractor.
- A 2-speed gearbox lets a smaller tractor start a full load in low and finish in high; it is worth the money on twin and triple augers.
Check the drawbar weight rating and the brakes too: a loaded 900 cu. ft. mixer can weigh over 20 tons.
Discharge options
| Option | Use when |
|---|---|
| Side door / drop chute | Low drive-by bunks, flat feed alleys, lowest cost |
| Front or rear cross conveyor | Feeding both sides of an alley in one pass |
| Hydraulic fold-up / slide-shift conveyor | High bunks, feeders over a curb, or filling a second wagon |
| Magnet bar on the door | Catching tramp metal before it reaches the cows |
Wear steel and options that change the price
- Lower tub liner: mild steel, AR200–AR400 or stainless.
- Knife package: standard vs. tungsten-carbide modular.
- Heavy-duty planetary drives and tandem axles on larger tubs.
- Scale electronics: wired or Bluetooth/wireless indicators, ration management software.
Truck-mount verticals
The same vertical tub on a truck chassis: 600–1,400 cu. ft., hydrostatic or mechanical drive, road speed between sites. New units run $200,000–$300,000+; late-model used $110,000–$170,000+; older units $75,000–$110,000. Inspect the truck as hard as the mixer — chassis, driveline and emissions equipment are their own bills.
Price bands
| Mixer class | Typical capacity | Older / high-hour used | Late-model used (2020–2024) | New (2025–2026) |
|---|---|---|---|---|
| Single-auger pull-type vertical | 300–550 cu. ft. (8.5–15.5 m³) | $20,000–$38,000 | $42,000–$62,000 | $50,000–$75,000 |
| Twin / triple-auger pull-type vertical | 600–1,200+ cu. ft. (17–34+ m³) | $35,000–$58,000 | $60,000–$95,000 | $85,000–$150,000+ |
| Truck-mounted vertical | 600–1,400 cu. ft. (17–40 m³) | $75,000–$110,000 | $110,000–$170,000+ | $200,000–$300,000+ |
Know the size you need? Request quotes on a pull-type — new, late-model or older used.