Independent TMR mixer sizing & multi-brand sourcing · US & Canadaquotes@rmhmixers.comparts@rmhmixers.com
Parts guide

Aftermarket TMR mixer parts & rebuild cost guide

Knives, re-flighting vs. complete augers, tub liner kits and planetary gearboxes: replacement cycles, real price ranges and what to have ready when you order.

Aftermarket specialists often undercut dealer counter prices by 20–40% on augers, knives, liners and planetary drives; heavy LTL freight from Midwest hubs (Iowa, Ohio, Wisconsin, Pennsylvania) comes on top.
ComponentReplacement cycleTypical US cost
Standard knives6–12 months$15–$40 per blade · $300–$1,000+ per set of 8–24+
Modular tungsten-carbide knives12–24+ months$40–$80+ per blade assembly
Auger re-flighting strips (AR steel)3–6 years$200–$600 per section, plus welding labor
Complete replacement vertical auger5–10 years$2,000–$6,000+ each · $4,000–$18,000 twin/triple
Partial / bottom mild-steel tub liner5–8 years$1,000–$2,500
Full stainless / AR-steel tub liner kit8–15+ years$3,000–$7,000+
Planetary gearbox rebuildAs needed$1,000–$3,000
Planetary gearbox replacementMajor failure$3,500–$10,000+
Scale load cells / weigh bars / indicators3–7 years or failure$800–$4,500

Knives: standard vs. tungsten-carbide

Standard hardened knives cost $15–$40 each and last 6–12 months; a full set is 8–24+ knives. Modular tungsten-carbide knives cost $40–$80+ per assembly but hold an edge 12–24+ months. On high-hay rations, carbide usually pays for itself in mixing time and fuel. Dull knives show up first as long particles on the top sieve and cows sorting at the bunk.

Re-flighting vs. a complete auger

When the flighting edge has worn thin but the auger core and lower plate are sound, AR-steel re-flighting strips ($200–$600 a section plus welding) bring it back. When the core is cracked, the bottom plate is worn through or the auger is out of balance, a complete replacement auger runs $2,000–$6,000+ each — $4,000–$18,000 for a twin or triple set.

Tub liners

The lower tub wears first. A partial mild-steel liner covering the bottom section runs $1,000–$2,500 and lasts 5–8 years; a full stainless or AR-steel kit runs $3,000–$7,000+ and lasts 8–15+ years. Stainless resists acidic silage; AR steel resists abrasion from sand and rock in the feed.

Planetary gearboxes

The planetary drive under each auger takes the full mixing load. A rebuild with seals, bearings and gears costs $1,000–$3,000; a complete replacement from builders such as Comer or Bondioli & Pavesi runs $3,500–$10,000+. Check oil at every service — metal in the oil is the cheapest warning you will get.

Have this ready when you order

  • Make, model and yeare.g. RMH TurboMix 24, Supreme 900T, Jaylor 5750.
  • Serial numberFrom the plate on the tub or frame; parts change between production runs.
  • Auger count and diameterAnd the number of knives per auger.
  • Bolt pattern or photosKnife bolt spacing, liner section shape, gearbox flange.
  • Ship-to ZIP and urgencyMachine down or scheduled — freight method depends on it.

Machine down? Send a parts request marked urgent, or email parts@rmhmixers.com with the serial number and a photo.